One-click |
Yes |
---|---|
Material |
Bricks, Concrete, Green concrete, Hard bricks, Hard floor tiles, Masonry & Brick, Reinforced concrete, Soft stone & stucco, Stone, Wall tiles |
Hole Saw length |
60mm |
Dry or Wet |
Dry drilling |
DIAMOND Core Drill MXqs ConcreteXdry
The Mandrex ConcreteXdry core drills are robust and built to last under high pressure conditions. The laser welded segments have been specially developed to ensure an extremely long lifetime. Fast and clean cutting is ensured when used in combination with the Mandrex MXqs ONE CLICK Hole Saw system.”
PROPERTIES
- High quality professional grade diamond
- Segment height 9mm
- Laser welded for strength and universal drilling
- Ideal for (soft) stone brickwork and concrete
- Fast and accurate cuts
- Premium grade diamond segments
- Side holes for release of dust
- Cutting depth 60mm (2-3/8”)
- Dry drilling no water required
Additional information
You may also like…
DUST & SLURRY TOOL – BIG
Work CLEAN and SAFE with the big DUST and SLURRY Tool for holes up to 102mm.Protect yourself ! Small particles you cannot see are the most dangerous!
This smart tool can not only be used against every smooth and non-porous material (e.g. glazed wall tiles, kitchen sheet from marble or natural stone), but also against less abrasive materials (depending on the roughness and the capacity of the vacuum/dust-cleaner you use).
Just push it against the surface and work dust free and clean!
Properties
- Diameters up to 102mm
- Dust reduction and water extraction
- Ideal for DryXcut, TileXcut and UniXcut
- For almost all types of drills
- Can be used wet or dry
MXqs ONE CLICK ARBORS
BETTER, FASTER AND MORE EFFICIENT THAN ALL OTHER EXISTING ARBORS IN THE MARKET
“Exchanging Hole Saws is a matter of pushing the button and sliding. With the MXqs arbors you only require one arbor for large and small Hole Saws. With our unique ONE CLICK arbor system it only takes seconds. Making use of the unique Mandrex MXqs arbor system brings you all its unique features with one simple CLICK. Just push the button and start saving time, money and frustration! To remove the Hole Saw to use another diameter, just push the button and exchange the Hole Saw. Slide on another Hole Saw and you are ready to go! Simple! You can now use the smaller Hole Saw to center the drill. It is easy to drill a hole with the desired diameter. (Extra adapter needed) Just push the button, move the Hole Saw back and forth and you have released the core! Drill the next hole easily and quickly, without struggling or waiting. Only one arbor needed for all Hole Saw diameters. No further need to have 2 arbors for large and small diameters.Properties
- Replace and mount every Hole Saw with “ONE CLICK’,
- Enlarge previously drilled holes,
- Eject the plug with “ONE CLICK”,
- 1 Arbor for large and small Hole Saws