Products

MANUAL CENTERING TOOL

Easy manual centering and security device which allows you to drill secure and stable in all kinds of materials. Just push it against the surface and hold it while you drill. Suitable for drilling diameters till Ø35mm. Can be used both wet and dry.When you need water: use the unique adjustable water supply. For the water supply you can use the water spray bottle MHD0002B. This smart tool can be used against any material and under many circumstances. It is stable because of the anti-slip rubber feet and the firm grip. Mark the position where you want to drill by using the build in ruler. To make sure you are precise and straight you can use the horizontal or vertical levellers. No markings on the drill anymore? Compare your drill with the diameter of your wallplug with the holes in the tool.

Properties

  • For small diameters up to 35 mm
  • Handy and safe
  • Ideal for DryXcut, TileXcut and UniXcut
  • For almost all types of drills
  • Can be used wet or dry
Product information

VACUUM CENTERING TOOL

Easy vacuum mounted centering tool which allows you to drill secure and stable in all kinds of materials. Just push it against the surface and push down the handle to secure. This smart centering tool can be used against every smooth and non-porous material e.g. glazed wall tiles, kitchen sheet from marble or natural stone. When you need water: use the unique adjustable water supply. For the water supply you can use the water spray bottle MHD0002B.For Dust and Slurry extraction you can use the Mandrex Dust and Slurry Tool MHD00102B

Properties

  • For small diameters up to 35 mm
  • Handy and safe
  • Ideal for DryXcut, TileXcut and UniXcut
  • For almost all types of drills
  • Can be used wet or dry
Productinformation

DUST & SLURRY TOOL – SMALL

Work CLEAN and SAFE with the DUST and SLURRY Tool. Protect yourself ! Small particles you cannot see are the most dangerous!Can be used with and without the MHD00101B Vacuum Centering Device. Together with the Vacuum Centering Device you will get all the benefits: no dust, no slurry, perfect centering and prevention of slipping of the drill. This smart tool can not only be used against every smooth and non-porous material (e.g. glazed wall tiles, kitchen sheet from marble or natural stone), but also against less abrasive materials ***( depending on the roughness and the capacity of the vacuum/dust-cleaner you use).*** Not in combination with the Vacuum Centering Device MHD00101B

Properties

  • Diameters up to 35mm
  • Dust reduction and water extraction
  • Ideal for DryXcut, TileXcut and UniXcut
  • For almost all types of drills
  • Can be used wet or dry
Productinformation

DUST & SLURRY TOOL – BIG

Work CLEAN and SAFE with the big DUST and SLURRY Tool for holes up to 102mm.Protect yourself ! Small particles you cannot see are the most dangerous!This smart tool can not only be used against every smooth and non-porous material (e.g. glazed wall tiles, kitchen sheet from marble or natural stone), but also against less abrasive materials (depending on the roughness and the capacity of the vacuum/dust-cleaner you use).Just push it against the surface and work dust free and clean!

Properties

  • Diameters up to 102mm
  • Dust reduction and water extraction
  • Ideal for DryXcut, TileXcut and UniXcut
  • For almost all types of drills
  • Can be used wet or dry
Productinformation

ULTIMATE SpeedXbit

Extreme fast drilling of holes compared to conventional flat spade drill bits. Our unique self-feeding threaded QuickTip Technology enables the drill bit to effortless pull itself into the wood. Precision grounded cutting edges for faster drilling and longer life time and a black oxide finish for more durabillity.Suitable for use on soft and hard wood, light building materials and plasterboard. This spade bit has a 1/4-inch hex shank and can be used in electric battery powered & cordless power tools, including impact drivers.

Features

  • Widest range of wood & wooden materials
  • Extremely fast because of the self-feeding QuickTip technology
  • Cutting depth 152 or 406mm
  • Hex 1/4” powerbit shank
  • Highest grade hardened steel cutting edges
  • Suitable for use in electric & battery powered tools
Product information

ULTIMATE 4X PowerXbit

Spiral flute Wood Bits with 4 cutting edges for faster and very accurate drilling in wood. Our unique self-feeding threaded QuickTip Technology enables the drill bit to effortless pull itself into soft and hard wood. Fast Chip removal in hard and soft wood, 5 times quicker compared to standard auger bits and more precise drilling due to our low friction grinded flute geometry and 4 cutting edges. This fast and accurate drill bit has a 1/4-inch hex shank and can be used in in cordless and corded impact and drill drivers and drill benches

Features

  • For hard and soft wood
  • More then 5 times faster
  • Extreme fast because of the self-feeding QuickTip technology
  • Cutting depth 160mm and Hex 1/4” shank
  • Highest grade hardened steel, extremely wear-resistant cutting edges
  • Precision grinded 4 cutting edges
  • Clean and straight drilling
Product information

ULTIMATE TwisterXbit

Auger Wood Bits for fast, powerful and accurate drilling in wood. Our unique self-feeding threaded QuickTip Technology enables the drill bit to effortless pull itself into the wood very deep.Fast Chip removal and precise drilling due to our low friction flute geometry. Suitable for use on soft and hard wood, light building materials, plasterboard and framing.Less friction and heat because of special diameter grinded flute below the drill point

Features

  • For wood & wooden materials
  • Extreme fast because of the self-feeding QuickTiptm technology
  • Cutting depths 110, 230 and 460mm for extreme deep holes
  • Precision grinded Auger bit
  • Highest grade hardened steel
  • Clean drilling
  • Hex 1/4”or 3/8” shank
Product information

3X FASTCUT

PLUNGE CUT WITHOUT RATTLING YOUR TEETH!The TRIPLE- sided 3X FASTCUT is a professional grade saw blade that fits all reciprocating saws. Made in Germany with 8% cobalt for exceptional strength, versatility and durability. Plunge cut witWood rattling your teeth. With its rounded tip and its double edged blade you can cut in both directions without flipping your saw over!

PROPERTIES

  • TRIPLE-sided,cuts 3 ways, 8% cobalt for long-lasting metal cutting
  • Exceptional strength versatility and durability
  • Rounded tip plunge cuts with ease
  • Cuts wood with nails pipe sheet metal plastic fiberglass and other materials
  • Optimized blade grind, set and kerf
  • Cost-effective — two blades for the price of one!
  • Made in Germany
Product information

HARDCUT

Top quality Tungsten Carbide Teeth combined with the power of this reciprocating saw give you the strength to cut through brick & mortar, stone, cinderblock, reinforced plastics, gypsum and many more materials. The special design is ideal for curve cuts and the high grade carbide teeth ensures a long lifetime.

Properties

  • Fits any reciprocating saw
  • Professional Grade
  • Fast cutting application for otherwise difficult jobs
  • Exceptional strength, versatility and durability
  • Ideal for curve cuts
  • Made in Germany
Product information

TOUGHCUT

This superior reciprocating saw blade with heavy duty industrial diamond grit which ensures smooth straight cutting through the hardest materials. Can be used for cutting cast iron, fibreglass, cement board, carbon fibre, bricks, building blocks, concrete etc.

Properties

  • Heavy duty industrial grit
  • Exceptional strength, versatility and durability
  • Blade length 200mm
  • Universal shank
  • Made in Germany
Product information

MULTICUT

Top quality multi-purpose saw blades for everyday applications. Ensures outstanding cutting, smooth and fast under heavy conditions. These Multicut blades are known for the wide range of materials they can be used for including wood with nails.

Properties

  • Exceptional strength, versatility and durability
  • Fast cutting
  • Multi-purpose blade
  • Bi-metal milled blade
  • Universal shank
  • Made in Germany
Productinformation

MULTICUT DEMOLITION AND RENOVATION

Extra thick , top quality, multi-purpose saw blades with special design for the demolition and renovation branches. Ensures outstanding cutting under heavy conditions. These Multicut saw blades are known for the wide range of materials they can be used for including wood with nails.

PROPERTIES

  • Extra Thick
  • Exceptional strength, versatility and durability,Fast cutting
  • Multi-purpose blade
  • Bi-metal milled blade
  • Universal shank
  • Made in Germany
Product information