MANUAL CENTERING TOOL
Easy manual centering and security device which allows you to drill secure and stable in all kinds of materials. Just push it against the surface and hold it while you drill. Suitable for drilling diameters till Ø35mm. Can be used both wet and dry.
When you need water: use the unique adjustable water supply. For the water supply you can use the water spray bottle MHD0002B. This smart tool can be used against any material and under many circumstances. It is stable because of the anti-slip rubber feet and the firm grip. Mark the position where you want to drill by using the build in ruler. To make sure you are precise and straight you can use the horizontal or vertical levellers. No markings on the drill anymore? Compare your drill with the diameter of your wallplug with the holes in the tool.
Properties
- For small diameters up to 35 mm
- Handy and safe
- Ideal for DryXcut, TileXcut and UniXcut
- For almost all types of drills
- Can be used wet or dry
Related products
COOLING GEL
For optimum lubrication during drilling, cutting and tapping. Suitable for both hard and soft metals. Also suitable for stainless steel.
MandreX Cooling Gel is a modern, high-quality cutting lubricant with a high gap-filling propensity
and excellent cooling properties. MandreX Cooling Gel can be used under normal circumstances for
almost all drilling, tapping and cutting work. The product reduces friction, yields a nicely-finished
surface and extends the service life of the cutting tools.
The high- quality components that go to make up MandreX Cooling Gel also make it suitable for use on stainless steel and other hard materiaIs.
Properties
- Very high temperature range
- Strongly sticky
- Can be used on all types of metal
- High cooling capacity
- Ready to use
- For Bi-Metal holesaws
CENTERING & COOLING AID
Ideal for drilling clean and accurate holes in hard tiles, etc. Extra safety is guaranteed with an additional safety lock.
Can be used in combination with the pressurized water spray bottle MHD00002B.
Suitable for sizes: Ø5,6,8,10 and 12mm.
Properties
- For small diameters
- Handy and safe
- For diamond hole saws DryXcut, TileXcut and UniXcut
DUST & SLURRY TOOL – BIG
Work CLEAN and SAFE with the big DUST and SLURRY Tool for holes up to 102mm.Protect yourself ! Small particles you cannot see are the most dangerous!
This smart tool can not only be used against every smooth and non-porous material (e.g. glazed wall tiles, kitchen sheet from marble or natural stone), but also against less abrasive materials (depending on the roughness and the capacity of the vacuum/dust-cleaner you use).
Just push it against the surface and work dust free and clean!
Properties
- Diameters up to 102mm
- Dust reduction and water extraction
- Ideal for DryXcut, TileXcut and UniXcut
- For almost all types of drills
- Can be used wet or dry
COOLING WAX
This COOLING WAX is specially developed for brazed diamond drills which require cooling. It can be used with the DryXcut, TileXcut and UniXcut diamond Hole Saws when drilling e.g. hard (natural) stone, porcelain and glazed tiles.
Properties
- Extra cooling
- Extends the lifetime
- Faster drilling
- For DryXcut, TileXcut and UniXcut
DUST & SLURRY TOOL – SMALL
Work CLEAN and SAFE with the DUST and SLURRY Tool. Protect yourself ! Small particles you cannot see are the most dangerous!
Can be used with and without the MHD00101B Vacuum Centering Device. Together with the Vacuum Centering Device you will get all the benefits: no dust, no slurry, perfect centering and prevention of slipping of the drill. This smart tool can not only be used against every smooth and non-porous material (e.g. glazed wall tiles, kitchen sheet from marble or natural stone), but also against less abrasive materials ***( depending on the roughness and the capacity of the vacuum/dust-cleaner you use).
*** Not in combination with the Vacuum Centering Device MHD00101B
Properties
- Diameters up to 35mm
- Dust reduction and water extraction
- Ideal for DryXcut, TileXcut and UniXcut
- For almost all types of drills
- Can be used wet or dry
VACUUM CENTERING TOOL
Easy vacuum mounted centering tool which allows you to drill secure and stable in all kinds of materials. Just push it against the surface and push down the handle to secure.
This smart centering tool can be used against every smooth and non-porous material e.g. glazed wall tiles, kitchen sheet from marble or natural stone. When you need water: use the unique adjustable water supply. For the water supply you can use the water spray bottle MHD0002B.
For Dust and Slurry extraction you can use the Mandrex Dust and Slurry Tool MHD00102B
Properties
- For small diameters up to 35 mm
- Handy and safe
- Ideal for DryXcut, TileXcut and UniXcut
- For almost all types of drills
- Can be used wet or dry